Standard hose lengths in a DIR single tank hose kit, as used in our open water training and rental equipment. These hose lengths were chosen to optimize performance and safety.
- Manufactured by SubGravity, your choice of rubber or their popular braided hoses
- Your choice of 7′ (213 cm) or 5′ (152 cm) primary regular hose
- 22″ (56 cm) secondary regulator hose
- 24″ (61 cm) SPG hose
- Colors! (in the braided option)
- *NOTE: the HP / SPG hose only comes in black
- Easy Grip Dry Suit Inflator Hose is a popular addition to this kit
All low and high pressure hoses have a limited service-life, irrespective of the external appearance.
- If there is any sign of gas-flow restriction in the regulator assembly, the diver should stop using the regulator immediately. A careful inspection of the regulator and the hose should be performed.
- Inspect all hoses regularly, including squeezing the hose every couple of inches to assess whether the hose exhibits the same degree of flex. Any indication of a change in the resistance while squeezing along the length of the hose could indicate a potential problem.
- Do not clean out the inside of any hose with a detergent. Use warm water and a mild soap, and dry in a ventilated room.
